Paper Jam Continues to Display on Hp Laser Jet Pro Mfp

Z7_3054ICK0KGTE30AQO5O3KA30N0

HP LaserJet Pro MFP M148dw, M148fdw Printers - Paper Jam Error

This document is for HP LaserJet Pro MFP M148dw, M148fdw printers.

When trying to print, one of the following error messages displays.

• Printer paper jam

• Paper Jam in Tray

• Paper Jam in Output Tray

• Remove paper from document feeder. Press [OK] to clear message.

• Paper Jam in Fuser

• Jam in print paper path. Open rear door and clear jam.

Clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.

Step 1: Look for jammed paper

Use one of the following sections to find and clear any paper that might be stuck in the area indicated by the message. If the error message does not indicate a specific area, or if no error message displays, read each section to clear any jammed paper.

Clear paper from the main input tray

Remove any jammed paper that is accessible from the main input tray area.

1. Use both hands to remove any jammed paper from the main input tray.

   

2. Load paper into the main input tray.

   

3. Try to print again.

If the error persists, check for jammed paper in another area of the printer.

Clear jammed paper from the output bin

Remove any jammed paper that is accessible from the output bin area.

1. Use both hands to remove any jammed paper or objects from the output bin.

   

2. Try to print again.

If the error persists, check for jammed paper in another area of the printer.

Clear paper from the document feeder and scanner lid

Remove any jammed paper that is accessible from the automatic document feeder (ADF) and scanner lid area.

1. Turn off the printer.

2. Use both hands to remove any visible jammed paper in the ADF input tray.

   

3. Open the ADF cover.

   

4. Use both hands to remove any jammed paper inside the ADF.

   

5. Close the ADF cover.

   

6. Open the scanner lid, and then use both hands to remove any jammed paper behind the white plastic backing.

   

7. Close the scanner lid.

   

8. Turn on the printer.

9. Try to print again.

If the error persists, continue to the next step to reset the printer.

Clear jammed paper from the toner cartridge area

Remove any jammed paper that is accessible from the toner cartridge area.

1. Turn off the printer, and then unplug the power cord from the electrical outlet.

2. Lift the scanner assembly.

   

3. Open the cartridge door.

   

4. Remove the toner cartridge.

   

5. Remove the imaging drum.

   

6. Remove any jammed paper from the toner cartridge area.

   

7. Pull the green tab to release the jam-access cover.

   

8. Remove any jammed paper.

   

9. Close the jam-access cover.

   

10. Align the imaging drum with the tracks inside the printer, and then gently push the imaging drum until it snaps into place.

    

11. Align the toner cartridge with the tracks inside the printer, and then push the toner cartridge until it snaps into place.

    

12. Close the cartridge door.

    

13. Lower the scanner assembly.

    

14. Reconnect the power cord to the electrical outlet, and then turn on the printer.

15. Try to print again.

If the error persists, check for jammed paper in another area of the printer.

Clear jammed paper from the duplexer area

Remove any jammed paper that is accessible from the output bin area.

1. Open the rear door.

   

2. Use both hands to remove any jammed paper from the duplexer area.

   

3. Close the rear door.

If you have removed all jammed paper from the printer and the error persists, continue to the next step to reset the printer.

Step 2: Reset the printer

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Resetting the printer might clear the error.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   note:

   HP recommends plugging the printer directly into a wall outlet.

Step 3: Try to print again

Try to print again to make sure the hardware functions correctly. If the problem persists, continue to the next step.

Step 4: Service the printer

Service or replace your HP product if the issue persists after completing all the preceding steps.

Go to Contact HP Customer Support to schedule a product repair or replacement. If you are in Asia Pacific, you will be directed to a local service center in your area.

To confirm your warranty status, go to HP Product Warranty Check. Repair fees might apply for out-of-warranty products.

lanepurpoer.blogspot.com

Source: https://support.hp.com/id-en/document/c06140802